Specifying The Copy Limitation With Remote Copying (Mode 028) - Konica Minolta bizhub 362 User Manual

Utility mode

Specifying the copy limitation with remote copying (mode 028)

Specify the maximum number of copies allowed when a document specified
for remote copying is received.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7
6, 5, 4, 3, 2,
1, 0
362/350/282/250/222
7 6 5 4 3 2 1 0
0 1 1 0 0 0 1 1 (HEX: 63)
Description Setting
----------------------- 0
Specifies the maxi- 0000001
mum number of
0000010
copies when a re-
mote copy docu-
:
ment is received
1100011
Others
Description
*Do not change this bit
when specifying settings
for this function.
1 copy
2 copies
99 copies
*Do not specify any set-
tings other than those
mentioned above when
specifying settings for
this function.
10
Page Refer-
ence
----------
p. 6-24
10-85