10
–
DP10: Select this setting when using a phone line with a dialing
speed of 10 pps.
–
PB: Select this setting when using a push-button line.
12
Check the information to
be registered, and then
touch [Enter].
To change a setting,
touch the button for the
setting to be changed,
and then specify the new
setting.
13
Touch [Enter] in each screen until the standby screen (initial screen) ap-
pears.
Note
The registered machine telephone number can be changed by following
the same procedure used to register it.
10-26
Utility mode
362/350/282/250/222