General Fax Operation; To Send A Fax - Konica Minolta bizhub 362 User Manual

Transmission
2 Transmission
2.1

General fax operation

This section contains information on the general operation for sending a fax.
An example of the basic procedure for sending a fax of a single-side docu-
ment scanned using the ADF is described below.

To send a fax

1
Press the [Fax/Scan] key to display the Fax mode screen.
2
Touch [Quality & Reduc-
tion] and [FAX Menu],
and then specify the de-
sired settings.
– For details on the
settings available on
the Quality & Reduc-
tion screen, refer to
"Specifying the
transmission set-
tings" on page 2-10.
– For details on the
settings available on
the FAX Menu
screen, refer to "Use-
ful transmission
functions" on
page 6-3.
3
Specify the fax number of the recipient.
– The recipient can be specified in any of the following ways.
– Direct dialing
– One-touch dial buttons
– Program buttons
– For details on specifying the recipient, refer to "Specifying a recip-
ient" on page 2-18.
362/350/282/250/222
2
2-3