Konica Minolta bizhub 362 User Manual page 377

Facsimile operations
Hide thumbs Also See for bizhub 362:
Table of Contents

Advertisement

13
Term
Long original
Main scanning di-
rection
Manual transmis-
sion
Memory
Memory overflow
Memory transmis-
sion
One-touch dial but-
ton
Original counter
Overseas transmis-
sion
Password transmis-
sion
Pause
PB
Polling
Program
Quick scan trans-
mission
Receiving
13-8
Definition
A setting for sending document pages longer than A3 size (420 mm);
Long documents can be transmitted by specifying the setting for long
originals.
The horizontal direction for scanning documents
An operation to send a fax while checking the status of the receiving ma-
chine
A location where data is temporarily stored; The memory is used when a
transmission is specified or a temporarily saved document is stored.
A condition where the fax memory becomes full when many documents
are scanned or temporarily saved documents are stored
The procedure for starting a fax transmission after a document is
scanned and stored in the memory; If memory transmission is used, the
total number of pages are automatically printed in the page number of the
transmission source information, and an image of the first page of the
sent document is included in the transmission activity report. However,
the memory may become full if there are many pages in the document or
if the data is large due to finely detailed images.
One of the functions for registering the fax numbers of recipients where
faxes are frequently sent; When a speed dial or address is registered, the
recipient can also be specified by using search characters for speed dial
selection if the recipient name and search characters are registered.
Used with the quick scan transmission to send the fax with the number
of pages indicated; This allows the recipient to easily check if all pages
were received. (With a memory transmission, the total paper number is
automatically added.)
A transmission to an overseas recipient; If an overseas transmission
mode is set, the fax is sent with a slower speed. Specifying an overseas
transmission mode when faxing to a location where transmission condi-
tions are poor, even within the country, ensures that the fax can be sent.
A function for sending a transmission with a password applied; If the re-
cipient's fax machine is set for closed network receptions, the sender's
fax machine must transmit with the same password as the closed net-
work reception password.
A temporary break in the dialing; Each pause creates a one-second break
during dialing.
Push-button (tone) line
A function for sending a document loaded to be scanned or stored on a
machine when a requested by the recipient
A function for registering recipient fax numbers where faxes are frequent-
ly sent and received and preset transmission operations; By simply
touching the button of a program to select it, the transmission can be au-
tomatically performed with the specified recipients and functions.
A function that begins sending the fax at the same time that the first page
is scanned; This function is used for faxing without filling the memory,
even if the document contains many pages.
The condition where the fax machine answers the call
Appendix
362/350/282/250/222

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub 350Bizhub 282Bizhub 222Bizhub 250

Table of Contents