Specifying Settings For The Stamp And Password Comparison (Mode 000) - Konica Minolta bizhub 362 User Manual

Utility mode

Specifying settings for the stamp and password comparison (mode 000)

Specify settings for stored (sent) stamping and communication password
comparison.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7
6
5, 4
3
2
1, 0
362/350/282/250/222
7 6 5 4 3 2 1 0
0 0 1 1 0 0 0 0 (HEX: 30)
Description Setting
Specifies whether to 0
return to the setting
1
for applying or not
applying the stored
(sent) stamp when
an operation is fin-
ished.
Specifies the posi- 0
tion of the stored
(sent) stamp.
1
----------------------- 11
Specifies whether to 0
return to the setting
1
for comparing or not
comparing the
transmission pass-
word when an oper-
ation is finished.
Specifies whether or 0
not to compare the
1
transmission pass-
word.
----------------------- 00
Description
Does not stamp
Stamps
Stamps at the top and
bottom of the document
Stamps only at the bot-
tom of the document
*Do not change these bits
when specifying settings
for this function.
Does not compare
Compares
Does not compare
Compares
*Do not change these bits
when specifying settings
for this function.
10
Page Refer-
ence
p. 6-20
p. 6-20
----------
p. 6-23
p. 7-3
----------
10-73