Konica Minolta bizhub 362 User Manual page 189

9
8
Touch [F-CODE].
9
Type in the F-code, and
then touch [Enter].
– Register the F-code
for using the bulletin
board.
– A maximum of 20
characters (0 through
9, # and *) can be en-
tered.
– Do not specify the
same F-code for a
different bulletin
board, or for a confidential box.
10
If desired, touch [F-
CODE Password], and
then type in password.
– Register a password
for each bulletin
board.
– A maximum of 20
characters (0 through
9, # and *) can be en-
tered. The entered
password appears
as asterisks (*).
? Although a password was specified, why can't viewing be limited?
% The password is entered when limiting viewing of the bulletin board.
To specify the viewing limitations, touch [Remote Input Check] or
[Remote Output Check].
11
Touch [Remote Input Check].
9-30
Registering/specifying settings
362/350/282/250/222