Table of Contents
Advertisement
8
Specifying settings for the information indicated in the report for direct
faxing/IP relay transmissions (mode 368)
Specify whether or not the results of direct faxing or IP relay transmissions
are indicated in the reception report.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were
selected.
Bit
7
6
5, 4, 3, 2
1
0
8-22
7 6 5 4 3 2 1 0
1 1 0 0 0 0 1 0 (HEX: C2)
Description
--------------------------
Specifies the valid
range of administrator
passwords.
*Regardless of the set-
ting specified for this
bit, this machine is set
to normally require the
administrator pass-
word with the machine
and with PageScope
Web Connection.
--------------------------
Specifies whether or
not the results of scan
transmissions are indi-
cated in the transmis-
sion report.
Specifies whether or
not the results of direct
faxing or IP relay trans-
missions are indicated
in the reception report.
Specifying management settings
Setting
Description
1
*Do not change this bit
when specifying settings
for this function.
1
The administrator pass-
word is required with this
machine and with Page-
Scope Web Connection.
0000
*Do not change these bits
when specifying setting for
this function.
0
Not indicated
1
Indicated
0
Not indicated
1
Indicated
bizhub 350/250 (Phase 2.5)
Page Refer-
ence
----------
----------
----------
----------
----------
Advertisement
Table of Contents
