Specifying Settings To Limit Dialing And Broadcast Transmissions (Mode 018) - Konica Minolta bizhub 362 User Manual

Utility mode
Specifying settings to limit dialing and broadcast transmissions (mode
018)
Specify whether or not broadcast transmissions and dialing to specify desti-
nations are limited.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7, 6, 5, 4
3
2
1, 0
*1 Prohibited when bit 6 of software switch setting mode 477 is set so that
the settings can only be specified in Administrator mode
362/350/282/250/222
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 1 (HEX: 01)
Description Setting
---------------------- 0000
Specifies whether or 0
not dialing to specify
1
a destination is pro-
hibited. *1
Specifies whether or 0
not broadcast trans-
1
missions are prohib-
ited.
---------------------- 01
Description
*Do not change these bits
when specifying settings
for this function.
Permitted
Prohibited
Permitted
Prohibited
*Do not change these bits
when specifying settings
for this function.
10
Page Refer-
ence
----------
----------
----------
----------
10-83