3
Specifying settings for the image in the failed transmission report (mode
023)
Specify whether or not an image of the transmitted document is added to the
failed transmission report.
Settings at time of purchase
Bits
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7, 6, 5, 4
3
2, 1, 0
3-26
Utility/Counter screen and PageScope Web Connection
7 6 5 4 3 2 1 0
1 1 1 1 1 0 0 0 (HEX: F8)
Description
Setting
-----------------------
1111
Specifies whether or
0
not an image of the
1
transmitted docu-
ment is added to the
failed transmission
report.
-----------------------
000
Description
*Do not change these
bits.
Is not added
Is added
*Do not change these
bits.
Page Refer-
ence
----------
----------
----------
200/250/350