To Specify The Tx Settings; Communication Mode - Konica Minolta bizhub 362 User Manual
Facsimile operations
Hide thumbs
Also See for bizhub 362:
- Service manual (846 pages) ,
- User manual (450 pages) ,
- Installation manual (36 pages)
Table of Contents
Advertisement
11
To specify the TX settings
1
In the Administrator mode, click the [Fax/Scan] tab.
–
For the procedure to log on to Administrator mode, refer to "Log-
ging on to Administrator mode" on page 11-9.
2
Click [TX Settings].
3
Specify each item, and then click [Apply].
–
For the item details, refer to page 11-31.
Communication mode
Select whether to enable or disable the individual communication modes.
The disabled communication modes will not appear in screens displayed in
the machine's control panel or in PageScope Web Connection pages.
Note
Programmed one-touch dial buttons can be used for transmission even
if a disabled communication mode has been specified.
11-32
Specifying settings using PageScope Web Connection
362/350/282/250/222
Advertisement
Table of Contents
