Specifying Settings For General Subscriber Lines (Mode 006) - Konica Minolta bizhub 362 User Manual

Utility mode

Specifying settings for general subscriber lines (mode 006)

Specify the setting for silent F net reception (port 1) and the calling method
on the general subscriber line.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7, 6, 5, 4, 3,
2
1
0
(*) Available when optional fax multi line is used.
362/350/282/250/222
7 6 5 4 3 2 1 0
0 0 1 1 0 0 1 0 (HEX: 32)
Description Setting
----------------------- 001100
Specifies the calling 0
method for the gen-
eral subscriber line.
(*)
1
----------------------- 0
Description
*Do not change these bits
when specifying settings
for this function.
Calls from the specified
line (port 1 or 2), based on
the operation and regis-
tration settings.
Calls from the available
line (port 1 or 2), regard-
less of the operation and
registration settings.
*Do not change this bit
when specifying settings
for this function.
10
Page Refer-
ence
----------
p. 10-36
----------
10-77