2
Specifying the transmission report printing condition
The conditions for printing the transmission result report can be specified.
The conditions for printing the transmission result report are preset with the
"Report Settings" parameters from the Administrator Management 1 screen.
Follow the procedure described below to change these conditions.
1
Touch [Menu].
–
If the optional fax kit has been installed, touch [FAX Menu].
2
Touch [TX Report] on the Setting 1 tab.
–
If the optional fax kit has been installed, touch [TX Report] on the
Set 1 tab.
SCANReady
One-Touch Search
Setting 1
TSI only
TSI
2in1
Job List
3
Specify the desired printing condition, and then touch [Enter].
SCANReady
One-Touch Search
Setting 1
TX Report
Default
ON
Job List
2-22
Standard
Chain
Direct
Quality&
Input
Reduction
Setting 2
Network
TX Report
2-Sided TX
Rotation TX
Memory
Free
Standard
Chain
Direct
Quality&
Menu
Input
Reduction
Setting 2
Network
Enter
Single Dest:
:
If TX
Fails
Broadcast
:
If TX
Fails
If TX Fails
OFF
Memory
Free
Menu
100%
100%
362/350/282/250/222/200
IP address faxing