Specifying The Transmission Report Printing Conditions (Report Settings); Specifying Tx Report Settings - Konica Minolta Printer/Fax/Scanner/Copier 250 User Manual

9
9.5 Specifying the transmission report printing conditions
(Report Settings)
You can specify the printing conditions for the transmission results and ac-
tivity reports.
Settings can be specified for the following.
Item
TX Report
Activity Report
!
Detail
If "Activity Report" is set to "ON", the activity report contents can be out-
putted as a CSV file and sent by e-mail to the administrator when the ac-
tivity report is printed. To manage the contents of the activity report as
data, specify the e-mail address of the administrator.
For details on the specifying the e-mail address of the administrator, refer
to the User's Guide [Copy Operations].

Specifying TX Report settings

1
Enter Administrator mode, and then touch [Admin. 1].
2
Touch [Report Settings].
Utility/Counter
Administrator Management 1
Initial
Setting
Account/
User Auth.
TX Settings
Print Lists
9-18
Description
Select to print the transmission report sent to single destinations
or broadcast.
ON: Prints regardless of the transmission results.
If TX Fails: Prints only when undeliverable.
OFF: Does not print regardless of the transmission results.
Select whether to print the activity report automatically every 50
transmissions.
Enter
Admin.Set
RX Settings
Report Document
Settings Management
Memory
Free
Specifying management settings
100%
200/250/350