Specifying management settings
9.5
Specifying the transmission report printing conditions
(Report Settings)
You can specify the printing conditions for the transmission results and ac-
tivity reports.
Settings can be specified for the following.
Item
TX Report
Activity Report
Specifying TX Report settings
1
Enter Administrator mode, and then touch [Admin. 1].
2
Touch [Report Settings].
Utility/Counter
Administrator Management 1
Initial
Setting
Account/
User Auth.
TX Settings
Print Lists
200/250/350
Description
Select to print the transmission report sent to single destinations
or broadcast.
ON: Prints regardless of the transmission results.
If TX Fails: Prints only when undeliverable.
OFF: Does not print regardless of the transmission results.
Select whether to print the activity report automatically every 50
transmissions.
Enter
Admin.Set
RX Settings
Report
Document
Settings
Management
Memory
Free
100%
9
9-19