Ring Nut; Bearing Race - Yamaha TT-R50E Owner's Service Manual

STEERING AND FRONT SUSPENSION
1
a
b
2
b
a
5 - 15
EC563000
REMOVAL POINTS
EC563202

Ring nut

1. Remove:
• Lower ring nut 1
Use the steering nut wrench 2.
Steering nut wrench:
YU-33975/90890-01403
WARNING
Support the steering shaft so that it may
not fall down.

Bearing race

1. Remove:
• Bearing race 1
Remove the bearing race using long rod
2 and the hammer.
2. Remove:
• Bearing race 1
Use the floor chisel 2.
CAUTION:
Take care not to damage the steering shaft
thread.
ASSEMBLY AND INSTALLATION
1. Install:
• Front fork assembly
NOTE:
When installing an inner tube assembly in the
lower bracket, align the projection a on the
inner tube assembly with the indentation b in
the lower bracket.
CHAS