1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Motorcycle
  5. TT-R50E
  6. Owner's manual

Yamaha TT-R50E Owner's Manual

Hide thumbs Also See for TT-R50E:
Table of Contents

Advertisement

Quick Links

Download this manual
Read this manual carefully before operating this vehicle.
Il convient de lire attentivement ce manuel avant la pre-
mière utilisation du véhicule.
Bitte lesen Sie diese Bedienungsanleitung sorgfältig
durch, bevor Sie das Fahrzeug in Betrieb nehmen.
MANUEL DU PROPRIÉTAIRE
BEDIENUNGSANLEITUNG
OWNER'S MANUAL
TT-R50E
TT-R50EF
2CJ-F8199-82

Advertisement

Table of Contents
loading

Related Manuals for Yamaha TT-R50E

Summary of Contents for Yamaha TT-R50E

  • Page 1 Read this manual carefully before operating this vehicle. Il convient de lire attentivement ce manuel avant la pre- mière utilisation du véhicule. Bitte lesen Sie diese Bedienungsanleitung sorgfältig durch, bevor Sie das Fahrzeug in Betrieb nehmen. OWNER’S MANUAL MANUEL DU PROPRIÉTAIRE BEDIENUNGSANLEITUNG TT-R50E TT-R50EF 2CJ-F8199-82...
  • Page 2 Original instructions Notice originale Originalbetriebsanleitung PRINTED IN CHINA 2014.06-0.3×1 CR (E,F,G)
  • Page 3 Read this manual carefully before operating this vehicle. OWNER’S MANUAL TT-R50E TT-R50EF 2CJ-F8199-82-E0...
  • Page 4 Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold. EC Declaration of Conformity conforming to Directive 98/37/EC, 2006/42/EC We, YAMAHA MOTOR CO., LTD. 2500 Shingai, Iwata, Japan, declare in sole responsibility, that the product TT-R50E (LBPCA01W6E0411900–...
  • Page 5 Yamaha has met these standards without reducing the performance or economy of operation of the motorcycle. To maintain these high standards, it is important that you and your Yamaha dealer pay close attention to the recommended maintenance schedules and operating instructions contained within this manual.
  • Page 6 Your motorcycle is equipped with an adjustable speed limiter. Yamaha recommends that all beginners start off with the speed limiter adjusting screw turned in to limit the amount of speed available while they learn. The adjusting screw may be gradually turned out to increase maximum speed as the beginner becomes more familiar with operating the motorcycle.
  • Page 7 IMPORTANT MANUAL INFORMATION EAU10134 Particularly important information is distinguished in this manual by the following notations: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 8 IMPORTANT MANUAL INFORMATION EAU37231 TT-R50E/TT-R50EF OWNER’S MANUAL ©2014 by Yamaha Motor Co., Ltd. 1st edition, May 2014 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Co., Ltd. is expressly prohibited. Printed in China.

  • Page 9: Table Of Contents

    TABLE OF CONTENTS LOCATION OF IMPORTANT FOR YOUR SAFETY – Adjusting the brake lever free LABELS ..........1-1 PRE-OPERATION CHECKS ..... 5-1 play ..........7-15 Adjusting the brake pedal free SAFETY INFORMATION ....2-1 OPERATION AND IMPORTANT play ..........7-16 RIDING POINTS ........ 6-1 Checking the shift pedal ....7-17 DESCRIPTION ........3-1 Starting and warming up a cold...
  • Page 10 TABLE OF CONTENTS MOTORCYCLE CARE AND STORAGE.......... 8-1 Matte color caution ......8-1 Care ..........8-1 Storage ........... 8-3 SPECIFICATIONS......9-1 CONSUMER INFORMATION ..10-1 Identification numbers....10-1 INDEX ..........11-1...

  • Page 11: Location Of Important Labels

    Read and understand all of the labels on your vehicle. They contain important information for safe and proper operation of your vehicle. Never remove any labels from your vehicle. If a label becomes difficult to read or comes off, a replacement label is available from your Yamaha dealer. For Canada...
  • Page 12 LOCATION OF IMPORTANT LABELS For Canada AT T E N T I O N N OT I C E 1P6-F151A-40 1P6-F151A-50 3PT-2118K-A1...
  • Page 13 LOCATION OF IMPORTANT LABELS For Canada This spark ignition system meets all requirements of the Canadian Interference Causing Equipment Regulations. Ce système d’allumage par étincelle de véhicule respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. 3JK-82377-00 THIS VEHICLE IS A RESTRICTED USE MOTORCYCLE AND IS NOT INTENDED FOR USE ON PUBLIC HIGHWAYS.
  • Page 14 LOCATION OF IMPORTANT LABELS For Europe...
  • Page 15 LOCATION OF IMPORTANT LABELS For Europe 100 kPa 100 kPa 1.00 kgf/cm² 1.00 kgf/cm² 15 psi 15 psi 5PG-2816R-00 1P6-F151A-80 5B6-2816R-00 3PT-2118K-A1 TT-R50E EN16029 2014 2.5 kW 57 kg YAMAHA MOTOR CO., LTD. 1P6-2156A-10 2500 SHINGAI, IWATA, JAPAN 5B6-2817L-00...
  • Page 16 LOCATION OF IMPORTANT LABELS Familiarize yourself with the following pictograms and read the explanatory text. Read the Owner’s manual. Never use on paved roads. Always approved Never carry passengers. helmet and protective gear. Use from 6 years old. This unit contains high- Operation of this motorcycle...
  • Page 17 LOCATION OF IMPORTANT LABELS Use unleaded gasoline only. 1 Year of construction **** YAMAHA MOTOR CO., LTD. 2500 SHINGAI, IWATA, JAPAN Measure the tire pressure when the tires are cold. Adjust the tire pressure. Improper tire pressure can cause loss of control.
  • Page 18 LOCATION OF IMPORTANT LABELS For Oceania and South Africa...
  • Page 19 LOCATION OF IMPORTANT LABELS For Oceania and South Africa N OT I C E 1P6-F151A-40 3PT-2118K-A1...

  • Page 20: Safety Information

    SAFETY INFORMATION  Never operate a motorcycle with-  The failure of motorists to detect EAU4121C out proper training or instruction. and recognize motorcycles in traf- Take a training course. Beginners fic is the predominating cause of Be a Responsible Owner should receive training from a cer- automobile/motorcycle accidents.
  • Page 21 SAFETY INFORMATION  Many accidents involve inexperi-  The posture of the operator is im-  Never wear loose-fitting clothes, enced operators. portant for proper control. The op- otherwise they could catch on the • Make sure that you are qualified erator should keep both hands on control levers, footrests, or wheels and that you only lend your mo-...
  • Page 22 Yamaha accessories, which are avail-  Accessory weight should be kept you try to ventilate engine exhaust able only from a Yamaha dealer, have with fans or open windows and as low and close to the motorcy- been designed, tested, and approved doors, carbon monoxide can rap- cle as possible.
  • Page 23 SAFETY INFORMATION products or having other modifications • Bulky or large accessories may tires, rims, sizes, and combinations performed to your vehicle that change seriously affect the stability of may not be appropriate. Refer to page any of the vehicle’s design or operation the motorcycle.
  • Page 24 SAFETY INFORMATION the location for the straps carefully so the straps will not rub against painted surfaces during transport.  The suspension should be com- pressed somewhat by the tie- downs, if possible, so that the mo- torcycle will not bounce exces- sively during transport.

  • Page 25: Description

    DESCRIPTION EAU10411 Left view 1. Fuel cock (page 4-7) 2. Throttle stop screw (page 7-11) 3. Air filter element (page 7-8) 4. Fuse (page 7-25) 5. Battery (page 7-23) 6. Engine oil drain bolt (page 7-7) 7. Shift pedal (page 4-3)

  • Page 26: Right View

    DESCRIPTION EAU10421 Right view 1. Seat (page 4-8) 2. Fuel tank cap (page 4-4) 3. Spark plug cap (page 7-6) 4. Brake pedal (page 4-3) 5. Clutch adjusting screw (page 7-15) 6. Engine oil filler cap (page 7-7)

  • Page 27: Controls And Instruments

    DESCRIPTION EAU10431 Controls and instruments 1. Engine stop switch (page 4-1) 2. Starter (choke) lever (page 4-8) 3. Main switch (page 4-1) 4. Brake lever (page 4-3) 5. Throttle grip (page 7-12) 6. Start switch (page 4-1)

  • Page 28: Instrument And Control Functions

    INSTRUMENT AND CONTROL FUNCTIONS EAU40341 EWA10073 EAU1234H Main switch Handlebar switches WARNING Never turn the key to “OFF” while Left the vehicle is moving, otherwise the electrical systems will be switched off, which may result in loss of con- trol or an accident. The main switch controls the ignition 1.

  • Page 29: Speed Limiter

    INSTRUMENT AND CONTROL FUNCTIONS EAU12661 EAU39865 Engine stop switch “ ” Speed limiter Set this switch to “ ” before starting Your motorcycle is equipped with an the engine. Set this switch to “ ” to adjustable speed limiter. The speed stop the engine in case of an emergen- limiter keeps the throttle from fully cy, such as when the vehicle overturns...

  • Page 30: Shift Pedal

    INSTRUMENT AND CONTROL FUNCTIONS EAU39852 EAU12892 EAU12944 Shift pedal Brake lever Brake pedal 1. Shift pedal 1. Brake lever 1. Brake pedal 2. Neutral position The brake lever is located on the right The brake pedal is located on the right This motorcycle is equipped with a side of the handlebar.

  • Page 31: Fuel Tank Cap

    INSTRUMENT AND CONTROL FUNCTIONS EAU13183 EAU13213 Fuel tank cap Fuel Make sure there is sufficient gasoline in the tank. EWA10882 WARNING Gasoline and gasoline vapors are extremely flammable. To avoid fires and explosions and to reduce the risk of injury when refueling, follow 1.
  • Page 32 EAU50253 There are two types of gasohol: gaso- as well as to the exhaust system. hol containing ethanol and that con- Your Yamaha engine has been de- For Canada taining methanol. Gasohol containing signed to use regular unleaded gaso- ethanol can be used if the ethanol con-...

  • Page 33: Fuel Tank Breather Hose

     Check the fuel tank breather hose Your Yamaha engine has been de- for cracks or damage, and replace signed to use regular unleaded gaso- it if necessary.

  • Page 34: Fuel Cock

    INSTRUMENT AND CONTROL FUNCTIONS This indicates reserve. If you run out of EAU13562 Fuel cock fuel while riding, move the lever to this The fuel cock supplies fuel from the position. Fill the tank at the first oppor- tank to the carburetor while filtering it tunity.

  • Page 35: Starter (Choke) Lever

    INSTRUMENT AND CONTROL FUNCTIONS EAU13591 EAU13962 Starter (choke) lever “ ” Seat To remove the seat Remove the bolts, and then pull the seat off. 1. Projection 2. Seat holder 1. Starter (choke) lever “ ” 2. Place the seat in the original posi- Starting a cold engine requires a richer tion, and then tighten the bolts.

  • Page 36: Sidestand

    INSTRUMENT AND CONTROL FUNCTIONS EAU37491 EAU41612 Sidestand Starting circuit cut-off system The sidestand is located on the left The starting circuit cut-off system pre- side of the frame. Raise the sidestand vents starting when the transmission is or lower it with your foot while holding in gear.
  • Page 37 With the engine turned off: 1. Make sure that the engine stop switch is set to “ ”. If a malfunction is noted, have a Yamaha 2. Turn the key to “ON”. dealer check the system before riding. 3. Shift the transmission into gear.

  • Page 38: For Your Safety - Pre-Operation Checks

    7-16, 7-17 • Adjust if necessary. • Make sure that operation is smooth. • Check throttle grip free play. Throttle grip 7-12, 7-20 • If necessary, have Yamaha dealer adjust throttle grip free play and lubricate ca- ble and grip housing.
  • Page 39 FOR YOUR SAFETY – PRE-OPERATION CHECKS ITEM CHECKS PAGE • Make sure that operation is smooth. 7-20 Control cables • Lubricate if necessary. • Check chain slack. • Adjust if necessary. Drive chain 7-18, 7-19 • Check chain condition. • Lubricate if necessary. •...

  • Page 40: Operation And Important Riding Points

    2. Turn the key to “ON” and make cold! understand, ask your Yamaha dealer. sure that the engine stop switch is EWA10272 set to “...

  • Page 41: Starting A Warm Engine

    OPERATION AND IMPORTANT RIDING POINTS EAU16641 EAU39902 ECA15442 Starting a warm engine Shifting NOTICE Follow the same procedure as for  Even with the transmission in starting a cold engine with the excep- the neutral position, do not tion that the starter (choke) is not re- coast for long periods of time quired when the engine is warm.

  • Page 42: Engine Break-In

    Since the engine is brand new, do not shifting to the next higher gear. during the engine break-in period, put an excessive load on it for the first immediately have a Yamaha dealer 5 hours of operation. The various parts EAU16711 check the vehicle.

  • Page 43: Parking

    OPERATION AND IMPORTANT RIDING POINTS EAU17172 Parking When parking, stop the engine, re- move the key from the main switch, and then turn the fuel cock lever to “OFF”. EWA10312 WARNING  Since the engine and exhaust system can become very hot, park in a place where pedestri- ans or children are not likely to touch them and be burned.

  • Page 44: Periodic Maintenance And Adjustment

    To avoid possible burns, let tivities incorrectly may increase brake components cool before your risk of injury or death during touching them. service or while using the vehicle. If you are not familiar with vehicle ser- vice, have a Yamaha dealer perform service.

  • Page 45: Periodic Maintenance Chart For The Emission Control System

     From 7000 km (4200 mi) or 18 months, repeat the maintenance intervals starting from 3000 km (1800 mi) or 6 months.  Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and tech- nical skills.

  • Page 46: General Maintenance And Lubrication Chart

     From 7000 km (4200 mi) or 18 months, repeat the maintenance intervals starting from 3000 km (1800 mi) or 6 months.  Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and tech- nical skills.
  • Page 47 • Replace if necessary. • Check operation and for oil leakage. Shock absorber assem- √ 15 * • Replace if necessary. • Apply Yamaha cable lubricant or other suitable cable lu- √ √ √ 16 * Control cables bricant thoroughly.
  • Page 48 PERIODIC MAINTENANCE AND ADJUSTMENT EAU40001 The air filter needs more frequent service if you are riding in unusually wet or dusty areas.

  • Page 49: Checking The Spark Plug

    Do not attempt to 1. Spark plug gap diagnose such problems yourself. In- Spark plug gap: stead, have a Yamaha dealer check 1. Spark plug cap 0.6–0.7 mm (0.024–0.028 in) the vehicle. 2. Remove the spark plug as shown, with a spark plug wrench available at a Yamaha dealer.

  • Page 50: Engine Oil

    PERIODIC MAINTENANCE AND ADJUSTMENT To install the spark plug EAU49933 Engine oil 1. Clean the surface of the spark The engine oil level should be checked plug gasket and its mating surfa- before each ride. In addition, the oil ce, and then wipe off any grime must be changed at the intervals spec- from the spark plug threads.

  • Page 51: Cleaning The Air Filter Element

    PERIODIC MAINTENANCE AND ADJUSTMENT 3. Remove the engine oil filler cap, EAU39835 Recommended engine oil: Cleaning the air filter element the engine oil drain bolt and its See page 9-1. The air filter element should be cleaned gasket to drain the oil from the Oil change quantity: as follows at the intervals specified in 0.80 L (0.85 US qt, 0.70 Imp.qt)
  • Page 52 4. Clean the sponge material with solvent, and then squeeze the re- Recommended oil: maining solvent out. WARNING! Yamaha foam air filter oil or other Use only a dedicated parts quality foam air filter oil cleaning solvent. To avoid the...

  • Page 53: Cleaning The Spark Arrester

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU40422 Cleaning the spark arrester The spark arrester should be cleaned at the intervals specified in the periodic maintenance and lubrication chart. EWA10981 WARNING  Always let the exhaust system cool prior to touching exhaust components. 1.

  • Page 54: Adjusting The Carburetor

    Tailpipe bolt: follows at the intervals specified in the 10 Nm (1.0 m·kgf, 7.2 ft·lbf) to a Yamaha dealer, who has the nec- periodic maintenance and lubrication essary professional knowledge and ex- chart. perience. The adjustment described in...

  • Page 55: Checking The Throttle Grip Free Play

    (b). resulting in improper air-fuel mixture and/or engine noise. To prevent this from occurring, the valve clearance must be adjusted by a Yamaha dealer at the intervals specified in the periodic maintenance and lubrication chart. 1. Throttle grip free play 1.

  • Page 56: Tires

    (i.e., when the temperature of the wall is cracked, have a Yamaha dealer tires equals the ambient tempera- replace the tire immediately. ture).

  • Page 57: Spoke Wheels

    EWA15542 rider. cycle, note following points WARNING regarding the specified wheels.  Have a Yamaha dealer replace  The wheel rims should excessively worn tires. Operat- checked for cracks, bends, warp- ing the motorcycle with exces- age or other damage, and the...

  • Page 58: Adjusting The Clutch Free Play

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU46252 EAU22132 Adjusting the clutch free play Adjusting the brake lever free The clutch free play must be checked play and, if necessary, adjusted as follows at the intervals specified in the periodic maintenance and lubrication chart. 1.

  • Page 59: Adjusting The Brake Pedal Free Play

     After adjusting the drive chain If proper adjustment cannot be ob- The brake pedal free play should mea- tained as described, have a Yamaha slack or removing and installing sure 10.0–20.0 mm (0.39–0.79 in) at dealer make this adjustment.

  • Page 60: Checking The Shift Pedal

    If opera- lubrication chart. Each brake is provid- Front tion is not smooth, have a Yamaha ed with a wear indicator, which allows dealer check the vehicle. you to check the brake shoe wear with- out having to disassemble the brake.

  • Page 61: Drive Chain Slack

    EAU40115 2. Shift the transmission into the To adjust the drive chain slack neutral position. Consult a Yamaha dealer before ad- 3. Measure the drive chain slack as justing the drive chain slack. shown. 1. Loosen the brake pedal free play...

  • Page 62: Cleaning And Lubricating The Drive Chain

    60 Nm (6.0 m·kgf, 43 ft·lbf) Locknut: For a thorough cleaning, have a 7 Nm (0.7 m·kgf, 5.1 ft·lbf) Yamaha dealer remove the drive chain 4. Adjust the brake pedal free play. and soak it in solvent. (See page 7-16.) 2.

  • Page 63: Checking And Lubricating The Cables

    Yamaha dealer at the intervals cated if necessary. If a cable is specified in the periodic maintenance damaged or does not move smoothly, chart.

  • Page 64: Checking And Lubricating The Brake Pedal

    The operation of the sidestand should The swingarm pivots must be lubricat- be checked before each ride, and the ed by a Yamaha dealer at the intervals sidestand pivot and metal-to-metal specified in the periodic maintenance contact surfaces should be lubricated and lubrication chart.

  • Page 65: Checking The Front Fork

    WARNING! To avoid injury, of it falling over. have a Yamaha dealer check or re- [EWA10752] securely support the vehicle so 2. Hold the lower ends of the front pair it.

  • Page 66: Checking The Wheel Bearings

    (See page 4-8.) hub or if the wheel does not turn This model is equipped with a VRLA smoothly, have a Yamaha dealer (Valve Regulated Lead Acid) battery. check the wheel bearings. There is no need to check the electro- lyte or to add distilled water.
  • Page 67 To charge the battery 3. Fully charge the battery before installation. NOTICE: When in- Have a Yamaha dealer charge the bat- tery as soon as possible if it seems to stalling the battery, be sure the have discharged. Keep in mind that the key is turned to “OFF”...

  • Page 68: Replacing The Fuse

    9. Turn the key to “ON”. 10. If the fuse immediately blows 4. Disconnect the battery coupler. 1. Battery coupler again, have a Yamaha dealer 2. Spare fuse check the electrical system. 3. Fuse If the fuse is blown, replace it as fol- lows.

  • Page 69: Supporting The Motorcycle

    PERIODIC MAINTENANCE AND ADJUSTMENT a jack either under each side of the EAU24351 EAU24361 Supporting the motorcycle Front wheel frame in front of the rear wheel or under Since this model is not equipped with a each side of the swingarm. centerstand, follow these precautions EAU56363 when removing the front and rear...
  • Page 70 PERIODIC MAINTENANCE AND ADJUSTMENT 2. Disconnect the brake cable at the wheel by removing the brake lever free play adjusting nut at the brake camshaft lever, then remove the cable from the brake camshaft le- ver. 1. Axle nut 1. Wheel axle 2.

  • Page 71: Rear Wheel

    PERIODIC MAINTENANCE AND ADJUSTMENT EAU25081 Rear wheel If the spring was removed, install it onto the brake cable with its smaller di- EAU56731 ameter end facing down. To remove the rear wheel EWA10822 WARNING To avoid injury, securely support the vehicle so there is no danger of it 1.
  • Page 72 PERIODIC MAINTENANCE AND ADJUSTMENT 2. Remove the brake pedal free play 7. Remove the wheel. adjusting nut, and then discon- nect the brake rod from the brake To install the rear wheel camshaft lever. 1. Install the drive chain onto the rear sprocket, lift the rear wheel off the ground, and then install the wheel by inserting the wheel axle togeth-...

  • Page 73: Troubleshooting

    However, should your motorcycle Tightening torque: require any repair, take it to a Yamaha Axle nut: 60 Nm (6.0 m·kgf, 43 ft·lbf) dealer, whose skilled technicians have the necessary tools, experience, and 7.

  • Page 74: Troubleshooting Chart

    Remove the spark plug and check the electrodes. The engine does not start. Have a Yamaha dealer check the vehicle. Check the compression. 4. Compression The engine does not start. There is compression.

  • Page 75: Motorcycle Care And Storage

    Some models are equipped with matte colored finished parts. Be ble. Rust and corrosion can develop Cleaning sure to consult a Yamaha dealer for even if high-quality components are ECA10773 NOTICE used. A rusty exhaust pipe may go un-...
  • Page 76 MOTORCYCLE CARE AND STORAGE off any detergent residue using shield. Test the product on a 2. Apply a corrosion protection spray plenty of water, as it is harmful small hidden part of the wind- on all metal, including chrome- to plastic parts. shield to make sure that it does and nickel-plated, surfaces to pre- ...

  • Page 77: Storage

    MOTORCYCLE CARE AND STORAGE 8. Let the motorcycle dry completely EAU26153 Storage before storing or covering it. Consult a Yamaha dealer for advice on EWA14502 what products to use. Short-term WARNING Always store your motorcycle in a cool, Contaminants on the brakes or tires dry place and, if necessary, protect it can cause loss of control.
  • Page 78 MOTORCYCLE CARE AND STORAGE 2. For motorcycles equipped with a WARNING! To prevent dam- sively cold or warm place [less fuel cock that has an “OFF” posi- than 0 °C (30 °F) or more than 30 age or injury from sparking, tion: Turn the fuel cock lever to make sure to ground the °C (90 °F)].

  • Page 79: Specifications

    TT-R50E 76.7 dB(A)@4250 r/min Primary reduction ratio: SAE 20W-40 Vibration on seat (EN1032, ISO5008): 3.722 (67/18) SAE 20W-50 TT-R50E Will not exceed 0.5 m/s² Final drive: –20 –10 0 10 20 30 40 50 ˚C Vibration on handlebar (EN1032, ISO5008): Chain TT-R50E Will not exceed 2.5 m/s²...
  • Page 80 SPECIFICATIONS 2nd: Tire air pressure (measured on cold Rear suspension: 1.736 (33/19) tires): Type: 3rd: Swingarm Front: 1.217 (28/23) Spring/shock absorber type: 100 kPa (1.00 kgf/cm², 15 psi) Chassis: Coil spring/oil damper Rear: Frame type: Wheel travel: 100 kPa (1.00 kgf/cm², 15 psi) Backbone 71 mm (2.8 in) Front wheel:...
  • Page 81 SPECIFICATIONS EAU51132 For Europe only The figures quoted are emission levels and are not necessarily safe working levels. Whilst there is a correlation be- tween the emission and exposure lev- els, this cannot be used reliably to determine whether or not further pre- cautions are required.

  • Page 82: Consumer Information

    These identification numbers are needed when registering the vehicle with the authorities in your area and when ordering spare parts from a Yamaha dealer. VEHICLE IDENTIFICATION NUMBER: 1. Vehicle identification number 1. Engine serial number The vehicle identification number is The engine serial number is stamped stamped into the steering head pipe.
  • Page 83 (See page 4-8.) Record the information on this label in the space provided. This information will be needed when ordering spare parts from a Yamaha dealer. EAU48121 Vehicle Emission Control Informa- tion label (For Canada) 1. Vehicle Emission Control Information label...

  • Page 84: Index

    INDEX Fuse, replacing ........7-25 Steering, checking ........7-22 Storage ...........8-3 Air filter element, cleaning ......7-8 Supporting the motorcycle ....7-26 Handlebar switches........ 4-1 Swingarm pivots, lubricating ....7-21 Battery ..........7-23 Brake lever ..........4-3 Identification numbers......10-1 Throttle grip and cable, checking and Brake lever, checking and lubricating ...........7-20 lubricating...........7-20...
  • Page 86 EAU54111 WARNING Improper motorcycle use can result in SEVERE INJURY or DEATH. NEVER CARRY ALWAYS USE NEVER USE PASSENGERS AN APPROVED ON PAVED HELMET AND ROADS PROTECTIVE GEAR NEVER ALWAYS operate: • without proper training or instruction. • use proper riding techniques to avoid •...

This manual is also suitable for:

Tt-r50ef

Table of Contents