Handlebar Grip - Yamaha TT-R50E Owner's Service Manual

1
1
a
b
HANDLEBAR
REMOVAL POINTS

Handlebar grip

1. Remove:
• Handlebar grip 1
NOTE:
Blow in air between the handlebar or tube
guide and the grip. Then remove the grip
which has become loose.
INSPECTION
Handlebar
1. Inspect:
• Handlebar 1
Bends/cracks/damage → Replace.
WARNING
Do not attempt to straighten a bent handle-
bar as this may dangerously weaken the
handlebar.
ASSEMBLY AND INSTALLATION
Handlebar
1. Install:
• Starter lever 1
NOTE:
Be sure to align the flat section a of the starter
lever 1 with the flat section b of the bracket
on the handlebar
2. Install:
• Left grip 1
Apply the adhesive to the handlebar 2.
NOTE:
• Before applying the adhesive, wipe off
grease or oil on the handlebar surface a
with a lacquer thinner.
• Be sure to align the projection "L" b on the
left grip with the punch mark c on the han-
dlebar.
5 - 11
CHAS