Display Pim Ipv6 Routing-Table - HP 6125G Command Reference Manual

Field
Uptime
Expires/Expiry time
Dr-Priority/DR Priority
Mode
Generation ID
Holdtime
LAN delay
Override interval
State refresh interval
Neighbor tracking
Bidirectional PIM
Neighbor Secondary Address(es)

display pim ipv6 routing-table

Syntax
display pim ipv6 routing-table [ ipv6-group-address [ prefix-length ] | ipv6-source-address
[ prefix-length ] | incoming-interface [ interface-type interface-number | register ] | outgoing-interface
{ include | exclude | match } { interface-type interface-number | register } | mode mode-type | flags
flag-value | fsm ] * [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its address, in the range of FFxy::/16, where
x and y represent any hexadecimal number between 0 and F, inclusive.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address.
prefix-length: Specifies the prefix length of the IPv6 multicast group/source address prefix. For an IPv6
multicast group address, the effective range is 8 to 128 and the default value is 128. For an IPv6 multicast
source address, the effective range is 0 to 128 and the default value is 128.
incoming-interface: Displays routing entries that contain the specified interface as the incoming
interface.
interface-type interface-number: Specifies an interface by its type and number.
Description
Length of time since the IPv6 PIM neighbor was discovered.
Remaining time of the IPv6 PIM neighbor. "Never" means that the
IPv6 PIM neighbor is always up and reachable.
Priority of the IPv6 PIM neighbor.
Mode of the IPv6 PIM neighbor.
Generation ID of the IPv6 PIM neighbor. (A random value that
indicates status change of the IPv6 PIM neighbor.)
Hold time of the IPv6 PIM neighbor; "forever" means that the IPv6
PIM neighbor is always up and reachable.
Prune message delay.
Prune override interval.
Interval for sending state refresh messages.
Displayed only when the IPv6 PIM neighbor works in IPv6 PIM_DM
mode and state refresh capability is enabled.
Neighbor tracking status (enabled/disabled).
IPv6 BIDIR-PIM status (enabled/disabled).
Secondary IPv6 address of the PIM neighbor (non-link-local
address).
322