Static-Rp (Ipv6 Pim View) - HP 6125G Command Reference Manual

Related commands: pim ipv6 state-refresh-capable, state-refresh-hoplimit, and state-refresh-interval.
Examples
# Configure the device to wait 45 seconds before it receives a new state refresh message.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] state-refresh-rate-limit 45

static-rp (IPv6 PIM view)

Syntax
static-rp ipv6-rp-address [ acl6-number ] [ preferred ]
undo static-rp ipv6-rp-address
View
IPv6 PIM view
Default level
2: System level
Parameters
ipv6-rp-address: Specifies the IPv6 address of the static RP to be configured. This address must be a real,
valid, globally scoped IPv6 unicast address.
acl6-number: Specifies a basic IPv6 ACL number, in the range of 2000 to 2999. If you provide this
argument, the configured static RP serves only those IPv6 multicast groups that pass the filtering.
Otherwise, the configured static RP serves the all IPv6 multicast groups.
preferred: Gives priority to the static RP if the static RP conflicts with the dynamic RP. If you do not include
the preferred keyword in your command, the dynamic RP receives priority, and the static RP takes effect
only if no dynamic RP exists in the network or when the dynamic RP fails.
Description
Use static-rp to configure a static RP.
Use undo static-rp to configure a static RP.
By default, no static RP is configured.
IPv6 PIM-SM or IPv6 PIM-DM cannot be enabled on an interface that serves as a static RP.
When the IPv6 ACL rule applied on a static RP changes, a new RP must be elected for all IPv6 multicast
groups.
You can configure multiple static RPs by using this command repeatedly. However, if you use this
command multiple times and specify the same static RP address or reference the same IPv6 ACL rule, the
last configuration overrides the previous one. If you have configured multiple static RPs for the same IPv6
multicast group, the one with the highest IPv6 address serves the group.
You can configure up to 50 static RPs on the same device.
Related commands: display pim ipv6 rp-info.
352