Display Igmp Ssm-Mapping Group - HP 6125G Command Reference Manual

Table 19 Command output
Field
Group
Source list

display igmp ssm-mapping group

Syntax
display igmp ssm-mapping group [ group-address | interface interface-type interface-number ]
[ verbose ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
group-address: Specifies a multicast group by its IP address, in the range of 224.0.1.0 to
239.255.255.255. If you do not specify any multicast group, the command displays the information of
all multicast groups created based on the configured IGMP SSM mappings.
interface interface-type interface-number: Specifies an interface by its type and number. If you do not
specify any interface, the command displays the multicast group information created based on the
configured IGMP SSM mappings on all the interfaces.
verbose: Displays the detailed multicast group information created based on the configured IGMP SSM
mappings.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display igmp ssm-mapping group to display the multicast group information created based on the
configured IGMP SSM mappings.
Examples
# Display the detailed information of multicast group 232.1.1.1 created based on the configured IGMP
SSM mappings.
<Sysname> display igmp ssm-mapping group 232.1.1.1 verbose
Interface group report information
Vlan-interface1(10.10.10.10):
Total 1 IGMP SSM-mapping Group reported
Group: 232.1.1.1
Uptime: 00:00:31
Description
Multicast group address
List of multicast source addresses
69