Holdtime Assert (Ipv6 Pim View); Holdtime Join-Prune (Ipv6 Pim View) - HP 6125G Command Reference Manual

holdtime assert (IPv6 PIM view)

Syntax
holdtime assert interval
undo holdtime assert
View
IPv6 PIM view
Default level
2: System level
Parameters
interval: Assert timeout time in seconds, with an effective range of 7 to 2,147,483,647.
Description
Use holdtime assert to configure the global value of the assert timeout time.
Use undo holdtime assert to restore the default.
By default, the assert timeout time is 180 seconds.
Related commands: holdtime join-prune, pim ipv6 holdtime assert, and pim ipv6 holdtime join-prune.
Examples
# Set the global value of the assert timeout time to 100 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] holdtime assert 100

holdtime join-prune (IPv6 PIM view)

Syntax
holdtime join-prune interval
undo holdtime join-prune
View
IPv6 PIM view
Default level
2: System level
Parameters
interval: Join/prune timeout time in seconds, with an effective range of 1 to 65,535.
Description
Use holdtime join-prune to configure the global value of the join/prune timeout time.
Use undo holdtime join-prune to restore the default.
By default, the join/prune timeout time is 210 seconds.
Related commands: holdtime assert, pim ipv6 holdtime assert, and pim ipv6 holdtime join-prune.
331