Dscp (Pim View); Hello-Option Dr-Priority (Pim View) - HP 6125G Command Reference Manual

Field
Priority
HoldTime
Uptime
Expires
RP mapping for this group

dscp (PIM view)

Syntax
dscp dscp-value
undo dscp
View
PIM view
Default level
2: System level
Parameters
dscp-value: Specifies the DSCP value for PIM messages, in the range of 0 to 63.
Description
Use dscp to set the DSCP value for PIM messages.
Use undo dscp to restore the default.
The default DSCP value in PIM messages is 48.
Examples
# Set the DSCP value to 63 for PIM messages.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] dscp 63

hello-option dr-priority (PIM view)

Syntax
hello-option dr-priority priority
undo hello-option dr-priority
View
PIM view
Default level
2: System level
Description
RP priority.
RP timeout time.
Length of time for which the RP has been up, in hh:mm:ss.
Length of time in which the RP will expire, in hh:mm:ss.
IP address of the RP that serves the current multicast group.
118