Display Pim Bsr-Info - HP 6125G Command Reference Manual

Examples
# Configure a C-RP policy so that only devices in the address range of 1.1.1.1/24 can be C-RPs that serve
multicast groups in the address range of 225.1.1.0/24.
<Sysname> system-view
[Sysname] acl number 3000
[Sysname-acl-adv-3000] rule permit ip source 1.1.1.1 0.0.0.255 destination 225.1.1.0
0.0.0.255
[Sysname-acl-adv-3000] quit
[Sysname] pim
[Sysname-pim] crp-policy 3000

display pim bsr-info

Syntax
display pim bsr-info [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display pim bsr-info to display BSR information in the PIM domain and the locally configured C-RP
information in effect.
Related commands: c-bsr and c-rp.
Examples
# Display the BSR information of the PIM-SM domain and the locally configured C-RP information in
effect.
<Sysname> display pim bsr-info
Elected BSR Address: 12.12.12.9
Priority: 64
Hash mask length: 30
State: Elected
Scope: Global
Uptime: 00:00:56
Next BSR message scheduled at: 00:01:14
Candidate BSR Address: 12.12.12.9
Priority: 64
103