Compare-Different-As-Med (Mbgp Address Family View); Dampening (Mbgp Address Family View) - HP 6125G Command Reference Manual

compare-different-as-med (MBGP address family view)

Syntax
compare-different-as-med
undo compare-different-as-med
View
IPv4 MBGP address family view
Default level
2: System level
Parameters
None
Description
Use compare-different-as-med to enable the comparison of the MED for paths from peers in different
ASs.
Use undo compare-different-as-med to disable the comparison.
The comparison is disabled by default.
If several paths to one destination are available, the path with the smallest MED is selected.
Do not use this command unless associated ASs adopt the same IGP and routing selection method.
Examples
# In IPv4 MBGP address family view, enable the comparison of the MED for paths from peers in different
ASs.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul] compare-different-as-med

dampening (MBGP address family view)

Syntax
dampening [ half-life-reachable half-life-unreachable reuse suppress ceiling | route-policy
route-policy-name ] *
undo dampening
View
IPv4 MBGP address family view
Default level
2: System level
Parameters
half-life-reachable: Specifies a half-life for active routes, in the range of 1 to 45 minutes. By default, the
value is 15 minutes.
169