Examples
# Set the maximum response delay for MLD general queries to 5 seconds globally.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] max-response-time 5
mld-snooping
Syntax
mld-snooping
undo mld-snooping
View
System view
Default level
2: System level
Parameters
None
Description
Use mld-snooping to enable MLD snooping globally and enter MLD-snooping view.
Use undo mld-snooping to disable MLD snooping globally.
By default, MLD snooping is disabled.
Related commands: mld-snooping enable.
Examples
# Enable MLD snooping globally and enter MLD-snooping view.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping]
mld-snooping done source-ip
Syntax
mld-snooping done source-ip { ipv6-address | current-interface }
undo mld-snooping done source-ip
View
VLAN view
Default level
2: System level
Parameters
ipv6-address: Specifies a source IPv6 address for the MLD done messages that the MLD snooping proxy
sends, which can be any legal IPv6 link-local address.
228