HP 6125G Command Reference Manual page 79

flags: Specifies the route flag.
act: Displays the IGMP routes with the ACT flag.
suc: Displays the IGMP routes with the SUC flag.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display igmp routing-table to display the IGMP routing table information.
Examples
# Display IGMP routing table information.
<Sysname> display igmp routing-table
Routing table
Total 3 entries
00001. (*, 225.1.1.1)
List of 1 downstream interface
Vlan-interface1 (20.1.1.1),
00002. (1.1.1.1, 225.1.1.1), Flag: ACT
List of 1 downstream interface in include mode
Vlan-interface2 (30.1.1.1),
00003. (*, 239.255.255.250)
List of 1 downstream interface
Vlan-interface3 (40.20.20.20),
Table 18 Command output
Field
Routing table
00001
(*, 225.1.1.1)
Flag
Protocol: STATIC
Protocol: IGMP
Protocol: IGMP
Description
IGMP routing table.
Sequence number of this (*, G) entry.
(*, G) entry of the IGMP routing table.
IGMP route flags:
•
•
ACT—Indicates IGMP routing entries that have been used for
forwarding data packets but have the multicast group
address out of the SSM group range.
SUC—Indicates IGMP routing entries that have been added
to the forwarding table and have the multicast group address
within the SSM group range.
67