Peer Default-Route-Advertise (Mbgp Address Family View) - HP 6125G Command Reference Manual

standard ORF information to the peer. For nonstandard ORF capability negotiation, you must also
configure the peer capability-advertise orf non-standard command in IPv4 unicast view.
After you disable the ORF capability, the local BGP router does not negotiate the ORF capability
•
with the specified peer or peer group.
Table 47 Description of the both, send, and receive parameters and the negotiation result
Local parameter
send
receive
both
Examples
# Enable the ORF capability for the BGP peer 18.10.0.9. Then, after negotiation, the local router can
exchange multicast ORF information with the peer 18.10.0.9.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 18.10.0.9 as-number 100
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul] peer 18.10.0.9 enable
[Sysname-bgp-af-mul] peer 18.10.0.9 capability-advertise orf ip-prefix both

peer default-route-advertise (MBGP address family view)

Syntax
peer { group-name | ip-address } default-route-advertise [ route-policy route-policy-name ]
undo peer { group-name | ip-address } default-route-advertise
View
IPv4 MBGP address family view
Default level
2: System level
Parameters
group-name: Specifies an IPv4 MBGP peer group by its name, a string of 1 to 47 characters.
ip-address: Specifies an IPv4 MBGP peer by its IP address.
route-policy-name: Specifies an routing policy by its name, a case-sensitive string of 1 to 63 characters.
Description
Use peer default-route-advertise to advertise a default route to a peer or a peer group.
Use undo peer default-route-advertise to disable default route advertisement to a peer or a peer group.
By default, no default route is advertised to a peer or a peer group.
Peer parameter
•
receive
•
both
•
send
•
both
both
203
Negotiation result
The ORF sending capability is enabled locally and
the ORF receiving capability is enabled on the peer.
The ORF receiving capability is enabled locally and
the ORF sending capability is enabled on the peer.
Both the ORF sending and receiving capabilities are
enabled locally and on the peer, respectively.