Pim Ipv6 Hello-Option Neighbor-Tracking; Pim Ipv6 Hello-Option Override-Interval - HP 6125G Command Reference Manual
Ip multicast
Hide thumbs
Also See for 6125G:
- Command reference manual (410 pages) ,
- Configuration manual (379 pages) ,
- Release note (60 pages)
Table of Contents
Advertisement
[Sysname-Vlan-interface100] pim ipv6 hello-option lan-delay 200
pim ipv6 hello-option neighbor-tracking
Syntax
pim ipv6 hello-option neighbor-tracking
undo pim ipv6 hello-option neighbor-tracking
View
Interface view
Default level
2: System level
Parameters
None
Description
Use pim ipv6 hello-option neighbor-tracking to disable join suppression—namely, to enable neighbor
tracking—on the current interface.
Use undo pim ipv6 hello-option neighbor-tracking to enable join suppression.
By default, join suppression is enabled. Namely, neighbor tracking is disabled.
Related commands: hello-option neighbor-tracking.
Examples
# Disable join suppression on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim ipv6 hello-option neighbor-tracking
pim ipv6 hello-option override-interval
Syntax
pim ipv6 hello-option override-interval interval
undo pim ipv6 hello-option override-interval
View
Interface view
Default level
2: System level
Parameters
interval: Prune override interval in milliseconds, with an effective range of 1 to 65,535.
Description
Use pim ipv6 hello-option override-interval to configure the prune override interval on the current
interface.
Use undo pim ipv6 hello-option override-interval to restore the default.
337
Advertisement
Table of Contents
