number between 0 and F, inclusive. If you do not provide a group address, this command displays
information about the RPs that corresponds to all IPv6 multicast groups.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display pim ipv6 rp-info to display RP information.
The RP information includes the information of RPs dynamically found by the BSR mechanism and static
RPs.
Examples
# Display the RP information that corresponds to the IPv6 multicast group FF0E::101.
<Sysname> display pim ipv6 rp-info ff0e::101
PIM-SM BSR RP information:
prefix/prefix length: FF0E::101/64
RP: 2004::2
Priority: 192
HoldTime: 130
Uptime: 00:05:19
Expires: 00:02:11
Table 73 Command output
Field
prefix/prefix length
RP
Priority
HoldTime
Uptime
Expires
dscp (IPv6 PIM view)
Syntax
dscp dscp-value
undo dscp
View
IPv6 PIM view
Default level
2: System level
Description
IPv6 multicast group that the RP serves.
IPv6 address of the RP.
RP priority.
Timeout time of the RP.
Length of time since the RP was elected.
Remaining time of the RP.
326