Display Multicast Routing-Table Static - HP 6125G Command Reference Manual

|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display multicast routing-table to display multicast routing table information.
Multicast routing tables are the basis of multicast forwarding. You can view the establishment state of an
(S, G) entry by checking the multicast routing table.
Related commands: display multicast forwarding-table.
Examples
# Display the routing information in the multicast routing table.
<Sysname> display multicast routing-table
Multicast routing table
Total 1 entry
00001. (172.168.0.2, 227.0.0.1)
Uptime: 00:00:28
Upstream Interface: Vlan-interface1
List of 2 downstream interfaces
Table 9 Command output
Field
Total 1 entry
00001
(172.168.0.2, 227.0.0.1)
Uptime
Upstream interface
List of 2 downstream interfaces

display multicast routing-table static

Syntax
display multicast routing-table static [ source-address { mask-length | mask } ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
1: Vlan-interface2
2: Vlan-interface3
Description
Total number of (S, G) entries in the multicast routing table.
Sequence number of the (S, G) entry.
(S, G) entry of the multicast forwarding table.
Length of time for which the (S, G) entry has been up, in
hours:minutes:seconds.
Upstream interface of the (S, G) entry. Multicast packets should
arrive at this interface.
Downstream interface list. These interfaces must forward multicast
packets.
46