display bgp multicast peer received ip-prefix
Syntax
display bgp multicast peer ip-address received ip-prefix [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ip-address: Specifies the IP address of a BGP peer.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp multicast peer received ip-prefix to display the prefix entries in the ORF information of
the specified BGP peer.
Examples
# Display the prefix information received from the BGP peer 10.1 10.25.20.
<Sysname> display bgp multicast peer 10.110.25.20 received ip-prefix
ORF ip-prefix entries: 2
ge: greater-equal
Index
Rule
10
permit 111.111.111.0/24
20
deny
Table 42 Command output
Field
ORF ip-prefix entries
Index
Rule
Prefix
Ge
Le
le: less-equal
Prefix
2.1.1.0/24
Description
Number of ORF prefix entries.
Index of a prefix entry.
Matching rule of the prefix.
Prefix information.
Greater-equal, which indicates that the mask length must be greater than
or equal to the specific value.
Less-equal, which indicates that the mask length must be less than or
equal to the specific value.
Ge
Le
26
32
26
32
183