Max-Response-Time (Mld-Snooping View) - HP 6125G Command Reference Manual

View
MLD-snooping view
Default level
2: System level
Parameters
interval: Sets the MLD last-listener query interval in seconds. The value range is 1 to 5.
Description
Use last-listener-query-interval to configure the MLD last-listener query interval globally.
Use undo last-listener-query-interval to restore the default.
By default, the MLD last-listener query interval is 1 second.
The MLD last-listener query interval determines the interval for sending MLD multicast-address-specific
queries and the maximum response delay for MLD multicast-address-specific queries.
This command works only in MLD snooping–enabled VLANs.
Related commands: mld-snooping last-listener-query-interval.
Examples
# Set the MLD last listener query interval to 3 seconds globally.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] last-listener-query-interval 3

max-response-time (MLD-snooping view)

Syntax
max-response-time interval
undo max-response-time
View
MLD-snooping view
Default level
2: System level
Parameters
interval: Specifies the maximum response delay for MLD general queries in seconds. The value ranges
from 1 to 25.
Description
Use max-response-time to configure the maximum response time for MLD general queries globally.
Use undo max-response-time to restore the default.
By default, the maximum response delay for MLD general queries is 10 seconds.
This command works only in MLD snooping–enabled VLANs.
Related commands: mld-snooping max-response-time and mld-snooping query-interval.
227