Field
Refcount
MED
Path
Origin
display bgp multicast peer
Syntax
display bgp multicast peer [ [ ip-address ] verbose ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
2: Monitor level
Parameters
ip-address: Specifies the IP address of an IPv4 MBGP peer to be displayed, in dotted decimal notation.
verbose: Displays the detailed information of the peer or the peer group.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp multicast peer to display IPv4 MBGP peer information.
Examples
# Display the detailed information of the IPv4 MBGP peer 10.1 10.25.20.
<Sysname> display bgp multicast peer 10.110.25.20 verbose
Peer: 10.110.25.20 Local: 2.2.2.2
Type: eBGP link
BGP version 4, remote router ID 1.1.1.1
BGP current state: Established, Up for 00h01m51s
Description
Count of routes that reference the path.
MED of the path.
AS_PATH attribute of the path, recording the ASs that it has passed to avoid routing
loops.
ORIGIN attribute of the path:
•
i—Indicates that the route is interior to the AS. Summary routes and routes injected
through the network command are considered IGP routes.
•
e—Indicates that the route is learned from the Exterior Gateway Protocol (EGP).
•
?—Indicates that the origin of the route is unknown. Routes redistributed from other
routing protocols have this origin attribute.
180