C-Bsr Priority (Ipv6 Pim View) - HP 6125G Command Reference Manual

View
IPv6 PIM view
Default level
2: System level
Parameters
interval: BS period in seconds, with an effective range of 10 to 2,147,483,647.
Description
Use c-bsr interval to configure the BS period, namely, the interval at which the BSR sends bootstrap
messages.
Use undo c-bsr interval to restore the default.
By default, the BS period value is determined by this formula: BS period = (BS timeout – 10) / 2.
The default BS timeout is 130 seconds, so the default BS period is (130 – 10) / 2 = 60 (seconds).
Related commands: c-bsr and c-bsr holdtime.
Examples
# Set the BS period to 30 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] c-bsr interval 30

c-bsr priority (IPv6 PIM view)

Syntax
c-bsr priority priority
undo c-bsr priority
View
IPv6 PIM view
Default level
2: System level
Parameters
priority: Priority of the C-BSR, in the range of 0 to 255. A larger value means a higher priority.
Description
Use c-bsr priority to configure the global C-BSR priority.
Use undo c-bsr priority to restore the default.
By default, the C-BSR priority is 64.
Related commands: c-bsr.
Examples
# Set the global C-BSR priority to 5.
<Sysname> system-view
[Sysname] pim ipv6
307