C-Bsr Hash-Length (Pim View) - HP 6125G Command Reference Manual

undo c-bsr group group-address
View
PIM view
Default level
2: System level
Parameters
group-address: Specifies a multicast group address, in the range of 239.0.0.0 to 239.255.255.255.
mask: Specifies the mask of the multicast group address.
mask-length: Specifies the mask length of the multicast group address, in the range of 8 to 32.
hash-length hash-length: Specifies the hash mask length in the admin-scope region that corresponds to
the specified multicast group, in the range of 0 to 32. If you do not specify this argument, the
corresponding global setting is used.
priority priority: Specifies the priority of the C-BSR in the admin-scope region that corresponds to a
multicast group, in the range of 0 to 255. A larger value of this argument means a higher priority. If you
do not specify this argument, the corresponding global setting is used.
Description
Use c-bsr group to configure a C-BSR for the admin-scope region associated with the specified group.
Use undo c-bsr group to remove the C-BSR configuration for the admin-scope region associated with the
specified group.
By default, no C-BSRs are configured for admin-scope regions.
Related commands: c-bsr admin-scope, c-bsr global, c-bsr hash-length, and c-bsr priority.
Examples
# Configure the device to be a C-BSR in the admin-scope region associated with the multicast group
address 239.0.0.0/8, with the priority of 10.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] c-bsr group 239.0.0.0 255.0.0.0 priority 10

c-bsr hash-length (PIM view)

Syntax
c-bsr hash-length hash-length
undo c-bsr hash-length
View
PIM view
Default level
2: System level
Parameters
hash-length: Hash mask length, in the range of 0 to 32.
97