Display Pim Ipv6 Join-Prune - HP 6125G Command Reference Manual

Field
PIM override interval (configured)
PIM neighbor tracking (negotiated)
PIM neighbor tracking (configured)
PIM generation ID
PIM require generation ID
PIM hello hold interval
PIM assert hold interval
PIM triggered hello delay
PIM J/P interval
PIM J/P hold interval
PIM BSR domain border
Number of routers on network not using DR priority
Number of routers on network not using LAN delay
Number of routers on network not using neighbor
tracking

display pim ipv6 join-prune

Syntax
display pim ipv6 join-prune mode { sm [ flags flag-value ] | ssm } [ interface interface-type
interface-number | neighbor ipv6-neighbor-address ] * [ verbose ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
mode: Displays the information of join/prune messages to send in the specified IPv6 PIM mode. IPv6 PIM
modes include sm and ssm, which represent IPv6 PIM-SM and IPv6 PIM-SSM respectively.
flags flag-value: Displays IPv6 PIM routing entries that contain the specified flags. Values and meanings
of flag-value are as follows:
rpt: Specifies routing entries on the RPT.
•
spt: Specifies routing entries on the SPT.
•
wc: Specifies wildcard routing entries.
•
Description
Configured prune override interval
Negotiated neighbor tracking status
(enabled/disabled)
Configured neighbor tracking status
(enabled/disabled)
Generation_ID value
Rejection of hello messages without Generation_ID
(enabled/disabled)
IPv6 PIM neighbor timeout time
Assert timeout time
Maximum delay of sending hello messages
Join/prune interval
Join/prune timeout time
Status of PIM domain border configuration
(enabled/disabled)
Number of routers not using the DR priority field on the
subnet where the interface resides
Number of routers not using the LAN delay field on the
subnet where the interface resides
Number of routers not using neighbor tracking on the
subnet where the interface resides
319