Specifying The Destination - Kyocera TASKalfa 3051ci Operation Manual

Internet Faxing (i-FAX) > i-FAX Transmission

Specifying the Destination

1
Press [i-FAX Addr Entry].
Enter Destination.
Destination
On Hook Direct Chain Detail/Edit
0001 0002 0003
AAA BBB CCC
0006 0007 0008
FFF GGG HHH
Destination Quick Setup Org./Sending
Data Format
Status
2
Press [i-FAX Address].
Enter Destination.
i-FAX Address Entry
Mode Simple
i-FAX
Address
Add to Addr Book
Status
3
Enter the destination address.
You can enter up to 128 characters.
For a Direct SMTP address, which does not go through a server, specify only the IP address of
the other machine, or specify any name using half-width alphanumeric characters in the format
"name@[IP address of other machine]".
Example: officeA@[192.168.48.21]
If Entry Check for New Destination is Off, press [OK] to complete entering the
number.
If Entry Check for New Destination is On, press [OK] and you are prompted to
confirm the FAX number is correct. Re-enter the same FAX number and press [OK]
to complete the entry.
For details, refer to the machine's Operation Guide. (8 Setup and Registration
(System menu) > Send > Entry Check for New Dest.)
To continue entering a new number, press [i-FAX Address Entry] and repeat the above
procedure.
To correct the FAX number, press [Edit].
For details on character entry, refer to
When [Add to Addr Book] is displayed, you can register entered contents to the Address
Book.
Destination
Detail
Address
Book
E-mail
1/1
Addr Entry
Folder Path
Entry
Delete Recall
FAX No.
Entry
0004 0005
No.
DDD EEE i-FAX
Addr Entry
0009 0010
1/100
WSD Scan
III JJJ
Color/ Advanced Program
Image Quality Setup
02/02/2013 10:10
Via Server On
Destination
Condition
Next Dest. Cancel OK
02/02/2013 10:10
Character Entry Method on page
8-10
11-2.