Character Entry Method; Entry Screens - Kyocera TASKalfa 3051ci Operation Manual

Appendix > Character Entry Method

Character Entry Method

To enter characters for a name, use the on-display keyboard in the touch panel following the steps as explained below.
NOTE
QWERTY, QWERTZ and AZERTY are keyboard layouts the same as a PC keyboard are available. If necessary,
change the layout. For information on how to change layouts, refer to the machine's Advanced Operation Guide.
QWERTY layout is used here as an example. You may use another layout following the same steps.

Entry Screens

Lower-case Letter Entry Screen
No. Display/Key
1 Display
2 Limit / Entry
Display
3 Cursor Key
4 [Backspace]
5 Keyboard
6 [Upper-case]
7 [Lower-case]
8 [No./Symbol]
9 [Space]
10 [Cancel]
11 [OK]
Use the keyboard to enter.
1
1 2 3 4
q w e r
5
a s d f
z x c v
Upper-case Lower-case No./Symbol
Status
6 7 8
Displays entered characters.
Displays maximum number of characters and the number of characters entered.
Press to move the cursor on the display.
Press to delete a character to the left of the cursor.
Press the character to enter.
Press to use upper-case letters.
Press to use lower-case letters.
Press to enter numbers and symbols.
Press to insert a space.
Press to cancel entered characters and return to the screen before the entry was made.
Press to finalize the entry and return to the screen before the entry was made.
3
5 6 7 8 9 0
t y u i o p
g h j k l ;
b n m , . /
Space
Cancel
9 10
Description
11-2
2
32
Limit: characters
Input: 0 characters
4
Backspace
! = `
[ ] \
'
@ _
OK
02/02/2013 10:10
11