Report For Job Canceled Before Sending; Fax Rx Result Reports - Kyocera TASKalfa 3051ci Operation Manual

Checking Transmission Results and Registration Status > Printing Administrative Reports

Report for Job Canceled before Sending

Print a send result report when the job is canceled before being sent.
Recipient Format
Select the Recipient Format for the send result report.
The name and destination that appear on the Send Result Report are taken from the information stored in the address book.
If [Name or Destination] is selected, either the name (destination name) or the destination (FAX No. or i-FAX address)
stored in the address book is shown.
If [Name and Destination] is selected, both the name (destination name) and destination (FAX No. or i-FAX address) are shown.
When the destination (e.g. FAX No.) was directly entered, only the destination (FAX No.) is shown.

FAX RX Result Reports

Each time you receive a fax, you can print a report to confirm whether the fax was received successfully.
NOTE
Fax receipt can also be notified by e-mail instead of checking the receipt result report.
(Refer to Reporting FAX Receipt Result by E-mail on page
1
Press the [System Menu] key.
2
Press [Report], [Next] of Result Report Setting, [Next] of Send Result Report and then
[Change] of Canceled before Sending.
3
Press [Off], [On].
4
Press [OK].
1
Press the [System Menu] key.
2
Press [Report], [Next] of Result Report Setting, [Next] of Send Result Report and then
[Change] of Recipient Format.
3
Press [Name or Destination], [Name and Destination].
4
Press [OK].
NOTE
This is not displayed if E-mail/Folder and Fax are both set to [Off] in Send Result
Reports.
1
Press the [System Menu] key.
2
Press [Report], and [Next] of Result Report Setting. Then press [Change] of FAX RX
Result Report.
3
Press [Off] (not to print), [On] (to print), or [Error/Storing in Box Only].
5-11.)
5-8