Registering An Encryption Key - Kyocera TASKalfa 3051ci Operation Manual

Setup and Registration > Encryption

Registering an Encryption Key

An encryption key is required when registering the Address Book used for encryption communication (the other party is
directly entered using the numeric keys) in the sending system and when setting encryption in the receiving system.
For the creation of the encryption key, numbers from 0 to 9 and letters from A to F are arranged to form 16 numbers and/
or letters arbitrarily.
NOTE
Up to 20 encryption keys can be registered.
1
Press the [System Menu] key.
2
Press [FAX], [Next] of TX/RX Common and then [Add/Edit] of Encrypt. Key
Registration.
FAX - Encrypt. Key Registration
Add a key to use for encrypted FAX transmissions.
(Up to 20 keys can be added.)
Encryption Key
Key01
Key02
Key03
Key04
Key05
Status
3
Select the unregistered encryption key and press [Add/Edit].
Encryption Key: 01
Add or edit the encryption key.
Enter 16 characters using the numbers 0-9 and the letters A-F.
Encryption Key
Status
4
Press [Encryption Key].
5
Use the numbers (0 to 9) and the alphabet (A to F) on the touch panel to enter the
encryption key (16 digits) and press [OK].
6
Press [OK]. To register other encryption keys, repeat steps 3 to 6.
Add/Edit
Delete
Close
02/02/2013 10:10
Cancel OK
02/02/2013 10:10
6-36