Setting The Tti Information; Local Fax Name Registration - Kyocera TASKalfa 3051ci Operation Manual

Setup and Registration > Setting the TTI information

Setting the TTI information

Register the name (local FAX name) and fax number to be printed in the transmit terminal identification (TTI) area, and
the FAX ID (local FAX information).
By registering the TTI data, the receiver can easily find out where the FAX came from.

Local FAX Name Registration

Register the local FAX name printed in the transmit terminal identification (TTI) area.
NOTE
If two fax kits are installed and two telephone lines are used, TTI information can be registered for each line. However,
only one FAX ID can be registered.
To change the entry, follow the same operation.
1
Press the [System Menu] key.
2
Press [FAX], [Next] of Transmission, [Next] of Basic, [Next] of Local FAX Name Entry
(Port1), or Local FAX Name Entry (Port2), and then [Change] of Local FAX Name
Entry. The entry screen will be displayed.
NOTE
Settings specified in Local FAX Name Entry (Port 1) are applied to Internet fax.
Use the keyboard to enter.
1 2 3 4 5 6
q w e r t y
a s d f g
z x c v b
Upper-case Lower-case No./Symbol
Status
3
Enter the Local FAX Name to be registered.
Up to 32 characters can be entered.
NOTE
For details on character entry, refer to
4
Press [OK].
32
Limit: characters
Input: 0 characters
Backspace
7 8 9 0 ! = `
u i o p [ ] \
h j k l ; '
n m , . / @ _
Space
Cancel OK
02/02/2013 10:10
Character Entry Method on page
6-4
11-2.