Kyocera TASKalfa 3051ci Operation Manual page 28

Preparation Before Use > Using the Address Book
3
Press [Change] of Address Number.
Address:
Name E-mail
Address Number : Auto
Name :
Status
4
Using [+]/[-] or the numeric keys, enter the custom address number (0001 to 2,500).
NOTE
The address number is the identification number for each destination. You can
select a number available from a total of 2,500 numbers for registration - 2,000
numbers for contact registration and 500 numbers for group registration.
If "0000" is entered, an unused number will be automatically assigned.
5
Press [OK].
6
Press [Change] of Name.
7
Enter the destination name to be displayed on the Address Book, and press [OK].
Up to 32 characters can be entered.
NOTE
For details on character entry, refer to
8
Press [FAX].
Address:
Name E-mail
Pause Space
Sub Address :
Encryption Key No. : Off
TX Start Speed : 33600bps
ECM : On
Status
9
Use the numeric keys to enter the number of the receiving system.
NOTE
Up to 32 digits can be entered as the number of the receiving system.
Press [Space] to enter a space.
Use [ ] or [ ] to move the cursor.
To correct the fax number, press [Backspace] on the touch panel, and delete the
digits one by one before reentering the fax number. To delete the number entirely,
press the [Clear] key on the operation panel.
SMB FTP FAX i-FAX
Change
Change
Cancel Back Register
02/02/2013 10:10
Character Entry Method on page
SMB FTP FAX i-FAX
Backspace
Change
Change
Change
Change
Cancel Back Save
02/02/2013 10:10
2-6
11-2.