Kyocera TASKalfa 3051ci Operation Manual page 97

FAX Operation (Advanced) > Printing/Sending Received Faxes by Requirements (Memory Forwarding)
Forward Settings
Print Settings
Storing in FAX Box Settings
After completing the settings, click [Submit] to save the settings.
To set forwarding of received faxes that do not meet the conditions, click [Settings] in Except of Rules in the condition
list. Set the Use Rule to [On] and then set each item. When Use Rule for Specific RX is selected, set the action that
takes place when a fax is received with conditions that are not registered in the list. Saving to a fax box is not possible. If
the Use Rule is set to [Off], received faxes that do not meet the conditions will be printed.
Item
Forwarding
Forwarding Destination
File Format
PDF Encryption
PDF/A
File Separation
E-mail Subject Additional Info.
FTP Encryption TX
Print
Copies
Storing in FAX Box
FAX Box
Specifies whether to forward.
Set the forwarding destination.
Address Book
Press [
and set the forwarding destination.
For details, refer to the Command Center RX User Guide.
Choose either PDF, TIFF or XPS as the file format used for
storing forwarded files.
Apply encryption to the PDF files to send-and-forward.
Turns PDF/A-compliant format PDF/A-1a or PDF/A-1b on or off,
when File Format above is PDF. PDF/A is an electronic document
file format for longterm preservation as addressed in the ISO
19005-1 specification.
Choose whether pages are separated when faxes are forwarded
to a computer.
When a forwarding address is specified as destination, [
Name Sender FAX No./ Address
] or [
Off
forwarding. When [ ], these will not be appended.
On
Turn [ ] to enable encryption for transmission. Note the SSL
protocol must also be turned on.
Specifies whether to print on paper.
When the previous item is set to On, specify the number of
copies.
Specifies whether to save faxes in a FAX box.
Specifies the FAX box to be used.
4-31
Description
E-mail Folder FAX
], [ ], [ ], [
] is appended at
-FAX
] and [i ],
Sender