FAX Operation (Advanced) > Printing/Sending Received Faxes by Requirements (Memory Forwarding)
Changing/Deleting Requirements for Forwarding
To change or delete the requirements for forwarding, follow the steps below.
Raising the Priority of Requirements for Forwarding
To raise the priority of the requirements for forwarding, follow the steps below.
Cancelling the Setting of RX/Forward Rules
To cancel the memory forwarding, follow the steps below.
1
Follow steps 1 to 3 of
2
Select the requirement name to be deleted or changed.
To delete the requirement name, go to the next step. To change the requirement name, go to
step 4.
3
Press [Delete]. When the confirmation screen is displayed, press [Yes] and go to step
6.
4
Press [Detail].
5
Refer to steps 5 to 26 of
settings.
6
When the deletion or change is completed, press [OK].
1
Follow steps 1 to 3 of
2
Select the requirement name to be reprioritized.
3
Press [Raise Priority]. The priority of the selected requirement is raised.
1
Press the
[System
Menu] key.
2
Press [FAX] and then [Next] of RX/Forward Rules.
3
Press [Off] and then [OK].
Use Rule for Specific RX on page
Use Rule for Specific RX on page 4-21
Use Rule for Specific RX on page
4-25
4-21.
to change the
4-21.