Kyocera TASKalfa 3051ci Operation Manual page 198

Internet Faxing (i-FAX) > i-FAX Transmission
Selecting the Resolution
Select the resolution suitable for sending originals. If you selected a resolution that is prohibited by the destination
conditions, the fax is automatically sent using a lower (permitted) resolution. For information on how to select the
resolution, refer to Selecting the Resolution on page
Selecting the Density
Adjust the density when scanning originals. For information on how to select the density, refer to
on page 3-9.
Entering the Subject and Body
When sending an Internet FAX (i-FAX), enter the subject and body of the i-FAX.
Item
Compression Select a suitable file format for the destination fax machine.
MH, MR, MMR or JBIG
Paper Size Specify the suitable document size options for the destination fax machine.
If you try to send an i-FAX using a prohibited paper size, it is automatically
changed to a permitted paper size and then sent.
• A4/Letter: Permitted (fixed)
• B4: Permitted or prohibited
• A3/Ledger: Permitted or prohibited
To permit a document size setting, press the key for that size so that it is
highlighted.
To prohibit a setting, press the key again so that it is no longer highlighted.
3
Press [OK].
3-10.
1
Press [Advanced Setup] and then [i-FAX Subject/Body].
Enter Destination.
i-FAX Subject/Body
Subject
Body
Display image
before sending.
Original : ---
Zoom : 100%
---
Send :
Preview
Add Shortcut
Status
2
Press [Subject].
3
Enter the subject, and press [OK].
Up to 60 characters can be entered for the subject.
4
Press [Body].
5
Enter the body and press [OK].
Up to 500 characters can be entered for the body.
6
Press [OK].
NOTE
If the other machine is set to print a cover page, the subject and message are
printed.
Description
Destination
Cancel OK
02/02/2013 10:10
8-12
Selecting the Density