Kyocera TASKalfa 3051ci Operation Manual page 90

FAX Operation (Advanced) > Printing/Sending Received Faxes by Requirements (Memory Forwarding)
24Select the FAX Box to be used to store the originals and press [OK].
If you set the password to FAX Box, enter the password and press [OK].
25You can change the following settings.
Number of Copies
Schedule setting
File name registration
Priority setting
NOTE
For details on above settings, refer to
26Press [Register].
The forwarding settings is registered.
27To register another forwarding settings, repeat steps 4 to 26.
28To set forwarding of received faxes that do not meet the conditions, select other, press
[Detail], and change the settings.
NOTE
If other is not selected, received faxes that do not meet the conditions will be
printed.
Save to FAX Box cannot be set in other settings.
29Select the checkbox beside the forwarding settings to be enabled from the list.
The checkbox beside the forwarding setting to be enabled is checked.
NOTE
To disable the setting, press the checkbox to delete the checkmark.
30Press [OK] to save the settings by each requirement.
Forwarding Detail Settings on page
4-24
4-26.