Setup and Registration > RX Start Speed
RX Start Speed
When communication conditions are bad, the fax may not be received correctly. In that case, set a lower RX Start
Speed.
Normally this should be used with the default setting.
1
Press the
[System
Menu] key.
2
Press [FAX], [Next] of Reception, [Next] of FAX, [
Speed (Port1) or RX Start Speed (Port2).
3
Press [9600bps], [14400bps] or [33600bps].
4
Press [OK].
6-23
], and then [Change] of RX Start