Kyocera TASKalfa 3051ci Operation Manual page 197

Internet Faxing (i-FAX) > i-FAX Transmission
Detailed Settings
In Detailed settings, Transmission mode allows to respond to receipts on FAX arrival. Destination Condition ensures to
synchronize Resolution, Compression, and Paper size settings with the destination.
Selecting the Transmission Mode
Transmission mode allows to respond to requests for read receipts on FAX arrival. To respond to receipt requests, select
Full in the Mode pull-down menu.
Setting the Via Server
Press [ ] of Via Server and select [On] or [Off].
When this setting is set to [Off], transmission takes place by direct SMTP (not through an e-mail server).
When this setting is set to [On], transmission takes place by the currently used i-FAX method (through an e-mail server).
NOTE
The settings are automatically configured based on the i-FAX transmission type that is set in Command Center RX.
When the transmission type is set to
Specifying the Destinations Conditions
Dialing methods without using the numeric keys
Using the Address Book (Refer to 3-19.)
Using One-touch keys (Refer to 3-22.)
Using the Speed Dial key (Refer to 3-22.)
Manual Redial (recall) (Refer to 3-23.)
NOTE
In addition to an i-fax, you can include FAX transmission, e-mail transmission and
folder (SMB/FTP) transmission to send as one job. For details, refer to the
machine's Operation Guide.
When the destination includes FAX or i-FAX, the FAX or i-FAX jobs are printed in
monochrome and the other sending jobs are printed as the same color as the
scanned originals.
[Via Server/Direct
1
Press [Destination Condition].
2
Specify the destination conditions and press [OK].
Item
Resolution Specify the resolutions that can be received by the destination fax machine.
If you try to send an i-FAX using a prohibited resolution, it is automatically
changed to a permitted resolution and then sent.
• 200 × 100 dpi: Permitted (fixed)
• 200 × 200 dpi: Permitted (fixed)
• 200 × 400 dpi: Permitted or prohibited
• 400 × 400 dpi: Permitted or prohibited
• 600 × 600 dpi: Permitted or prohibited
To permit a resolution setting, press the key for that resolution so that it is
highlighted.
To prohibit a resolution, press the key again so that it is no longer
highlighted.
SMTP], these settings can be configured.
Description
8-11