Quick Setup Wizard (Fax Setup); Fax Setup Items - Kyocera TASKalfa 3051ci Operation Manual

Preparation Before Use > Quick Setup Wizard (Fax Setup)

Quick Setup Wizard (Fax Setup)

In quick setup mode, a wizard is used to configure the following settings Be sure to complete the settings before using
the fax system.

Fax setup items

Step
1.Dialing/RX Dialing Mode(Port 1)
Mode Dialing Mode(Port 2)
Reception Mode
Auto (DRD)
2.Local FAX Local FAX Name(Port 1)
Information Local FAX Name(Port 2)
Local FAX Number(Port 1)
Local FAX Number(Port 2)
Local FAX ID
TTI
3.Sound FAX Speaker Volume
FAX Monitor Volume
Job Finish
4.Rings Rings(Normal)
Rings(TAD)
Rings(FAX/TEL)
5.Output Media Type
Paper Output (Port 1)
Paper Output (Port 2)
Reduced RX Size
6.Redial Retry Times
NOTE
The settings can be changed in the system menu.
Setting item Description
Select the dialing mode according to the line type.
Select the reception mode.
Select the reception pattern.
Register the local fax name printed on the fax on the
receiving system.
Local FAX Number is also used to restrict the parties with
which fax communication is performed.
Enter the local fax ID. The local fax ID can limit other
parties with which you can communicate. Enter the four-
digit local FAX ID number.
Select whether or not to print the local fax information on
the fax on the receiving system.
Set the volume when pressing [On Hook].
Speaker Volume: Volume of the built-in speaker when the
line is connected by pressing [On Hook].
Set the monitor volume.
Monitor Volume: Volume of the built-in speaker when the
line is connected without pressing [On Hook] such as in
memory transmission.
Sets whether an audible signal is generated when a
job is successfully completed.
Set number of times to let phone ring before answering a
call.
Set number of times to let phone ring before switching to
the answering machine.
Set number of times to let phone ring before switching the
FAX and the phone.
Specify the paper type to be used for print output of the
received fax.
Select paper output for the received FAX.
Reduces the received FAX size before printing if the size
is larger than the current paper size.
Set the number of redials.
2-2
Reference
6-2
6-17
6-24
6-4
6-5
6-6
6-3
6-14
6-14
6-15
6-13
6-11
6-13
6-19
6-45
6-40
6-16