Kyocera TASKalfa 3051ci Operation Manual page 30

Preparation Before Use > Using the Address Book
NOTE
Register the encryption key in advance. For details, refer to
Encryption Key on page
16To specify the Encryption Box of the other party, press [Encryption Box], and go to the
next step.
To print originals in the receiving system, select [Off], press [OK], and go to Step 19.
17Press [On], and enter the destination encryption FAX Box number (four digits) with the
numeric keys, and press [OK].
18Press [OK].
19If necessary, press [TX Start Speed] and [ECM] to change the settings. Press
[Change] of each key to change the settings, and press [OK].
The default TX Start Speed setting is 33,600 bps, and the default ECM setting is ON.
Key
TX Start Speed
ECM
20Check if each item has been entered correctly.
21Check if the destination has been set correctly, and press [Register].
The destination is added to the Address Book.
22The one-touch key registration confirmation screen appears. Select [Yes] or [No].
If you selected [Yes], the one-touch key registration screen appears. Go to the next
step.
If you selected [No], registration ends.
23Select the One-touch key number to which to register the destination, and Press
[Next].
24Select the destination to which to register, and Press [Next].
The destination details can be changed by selecting the destination and pressing [Detail].
25Press [Change] for [Display Name] and [Destination] to change the settings as
needed.
26Press [Register].
If the one-touch key has already been registered, the overwrite registration confirmation screen
appears. Press [Yes] or [No].
6-36.
To change the transmission start speed, press this key. Select the
speed from 33,600 bps, 14,400 bps, and 9,600 bps.
ECM (error correction mode) prevents distortion of the fax image by
automatically resending any parts of the data that were not correctly
sent due to the effects of noise on the telephone line during
transmission. To change the ECM communication setting, press
this key.
2-8
Registering an
Description